The Highline Whisky Special Update: It's Getting Close!

After applying numerous coats of gloss tung oil, I rubbed out the finish with 0000 steel wool and followed up with some carnauba paste wax. The result really shows off the body wood's grain and texture while preserving the neck's silky feel. Check it out so far:

The hardware was temporarily installed to make sure everything lined
up as it should.

The next step will be to wind some pickups that will compliment the guitars tonal capability as well as its visual style.

Revamping the Nosferatu Guitar

A while back, I stated my lack of love for nitrocellulose lacquer as a finish for electric guitars. Not only are the fumes toxic and explosive, but the resulting finish can take forever to cure. After well over a month, the nitro I sprayed on the Nosferatu guitar just didn't want to harden up. Every time I picked up the body, I'd leave fingerprints imbedded in the clear coat! For that reason, I decided to strip the finish all the way back to bare wood so I could start over with water-based lacquer, a finish I'm far more enthusiastic about. Here's how the process has gone so far:

After sanding the body to 220 grit, I brushed on some black acrylic.

Next, I applied red acrylic with drips and splatters.

Finally, I sprayed on about 6 heavy coats of Hydrocoat Resisthane Plus
water-based lacquer. I'll wait a week or so to let the lacquer cure
before I proceed with wet sanding and the final polish.

 The nice thing about the water-based lacquer I'm using is it dries rock hard in only a couple of hours. In my experience, this stuff will cure out many times harder than nitro. Hurray for modern chemistry!

Highline Single Cut Update: A Little Necking Today

The headstock has been rough sanded to shape. The cap is Maple
with a nice flame pattern, which will match the body.

I started blending the back of the headstock with a rasp file.

The heel was blended the same way as the headstock. At this point,
I'm thinking of adding a long tenon, but we'll see.

Update: Getting Oiled Up!

I like to add several heavy coats of tung oil in order to achieve a glossy sheen that highlights the grain without filling in the wood's beautiful texture. I HATE the thick, glossy look so many guitars have these days. Instead, I prefer to showcase the beautiful (expensive) hardwoods I use.

Update: Wiring Up The Whisky Special Guitar

The first coat of tung oil.

I used a blank Tele control plate and drilled holes
for the pots and switch.

I use black wire for ground and red for the signal.
The cap is an Orange Drop .047.

Update: The Whisky Special Guitar Gets Stained

After sanding the body and neck down to 220 grit, I wiped on my home brewed stain mix. The concoction features several ingredients including some Jack Daniel's whisky.I'll let it dry and start wiping on the tung oil tomorrow. Check out the latest photos of the progress so far:

Update: Adding A Little Flair To The Highline Whisky Special

I carved the top into two levels, drilled some sound holes and added
some Mahogany accents. Next up, I've got to do some serious sanding.