 |
| I started this build by printing out the pages for the body and neck on my desktop inkjet printer. |
 |
| After cutting out the printed parts, I traced them onto a sheet of 12mm Birch plywood, which will be used to make reusable templates. |
 |
| Next, I rough cut the shapes with a jigsaw. For each guitar I build, I make a template for the neck, the body, the control cavity, the control cavity cover and the neck pocket. |
 |
| After rough cutting the templates, I take them over to my band saw to trim them to the outside edge of the lines I traced from the printed cutouts. |
No comments:
Post a Comment