Tuesday, July 12, 2011

Update: The Whisky Special Guitar Gets Routed

I used some scrap plywood to make a template for routing the
neck pocket. The bit I used in my router is a 1/2" diameter,
1" tall pattern bit with a 1/2" diameter bearing collared on the shaft.

The Whisky Special will be equipped with humbuckers, so I made a
template out of scrap MDF board to serve as a template. I used the
same bit for this task as I used for the neck pocket.

Since the body is semi-hollow, I plan to add some sound holes and
some cool looking Mahogany accents. Stay tuned!

No comments:

Post a Comment