Monday, December 27, 2010

Electric Guitar Building Update

Now that the Christmas holiday is behind me, I'm back to building my guitars. The Highline Legato is currently resting a few days so the lacquer top coat can cure before I wet sand and buff it out. Hopefully this coming weekend, I'll be able to polish the neck and body so I can put the two together. In the meantime, I've started work on another Highline electric guitar design which will be a single cut with a set-in neck. Here's a shot of the work so far:
There's no substitute for a sweet piece of Honduran Mahogany when it comes to making a guitar neck!
Tomorrow, I'll be getting a 2-1/4" thick, 35" long, 7" wide slab of Honduran Mahogany for the body. My plan is to plane down the thickness and add a figured Maple top, but that will depend on how the grain looks on the Mahogany after I cut the slab in half and glue the two pieces together. If the grain fails to inspire me, I'll start shopping for a nice bookmatched set of flamed Maple boards. Stay tuned!

5 comments:

  1. Chris,

    What is the best way to cut the scarf joint? I don't have a good enough bandsaw to cut it like you did in the video. Would this be a better way to build the necks for a Hooligan or a Caractacus?

    Kevin

    ReplyDelete
  2. Before I had my bandsaw, I used a regular old handsaw to cut the joint. It takes more effort, but it's doable.

    ReplyDelete
  3. Leather Repair & Care offer nationwide French Polishing repairs,Wooden Repairs and renovation to all wooden surfaces, Cabinet repairs offering wood repairs to scratches, dents and heat marks to a full renovation.

    ReplyDelete
  4. Internet Positif adalah kendala utama yang membuat kamu kesulitan menjangkau situs judi online seperti S128 Poker. Tapi sekarang kamu tidak perlu khawatir akan hal tersebut karena sekarang sudah ada Situs Alternatif LiveChat S1288Poker yang akan mempermudah kamu dalam konfirmasi deposit dan juga withdraw (Baca Selengkapnya...)

    ReplyDelete